GENTAUR EUROPE  +32 1658 9045 +32 1650 9045BELGIUM1 tel +32 2 732 5688 fax +32 2 732 4414 [email protected] Av. de l' Armée 68 B-1040 Brussels France tel 01 43 25 01 50 fax 01 43 25 01 60 9, rue Lagrange 75005 Paris Italy tel 02 36 00 65 93 fax +32 16 50 90 45 20135 Milano Germany tel +32 16 58 90 45 fax +32 16 50 90 45 Forckenbeckstraße 6 D-52074 Aachen Japan tel +81 78 386 0860 fax +81 78 306 0296 Minaatojimaminami-manchi Chuo-ku, Kobe 065-0047  |
VX-200 Vortex Mixer
Continuously variable speed makes the Vortex Mixer VX-200 useful for a
variety of applications, from gentle mixing to resuspending pellets. The
unit has a circular orbit, rather than the elliptical orbit found on
many other vortexers. This allows a vortexing motion to be achieved even
at low speeds, a task that cannot be accomplished with eliptical orbit
units.
Many vortex mixers prevent excessive vibration with added weight or suction feet which hold the unit in position. ration during operation and prevent the unit from walking across the bench, even at high speeds. The Vortex Mixer VX-200 is lightweight and has no suction feet, allowing it to be easily moved from one place to another.
The Vortex Mixer VX-200 can be operated in either touch or continuous mode. When in touch mode, the motion is activated by depressing the sample head and stopped by removing the pressure. If the unit is set in the on position, the Vortex Mixer VX-200 will operate continuously until turned off. The small footprint and portability of the Vortex Mixer VX-200 allow it to be used almost anywhere. The unit is safe for use in temperature controlled environments.
Click to enlarge image
The CombiCup head supplied with the Vortex Mixer VX-200 can be used with a single tube or a whole handful. The unique over molding technology used in the manufacutre of the CombiCup provides a sturdy plastic core surrounded with nonslip TPE. Optional heads accept microplates, microtubes, PCR strip tubes,15 and 50 ml tubes and blood tubes. All heads are friction fit - simply pull up to remove and press down to replace.
Many vortex mixers prevent excessive vibration with added weight or suction feet which hold the unit in position. ration during operation and prevent the unit from walking across the bench, even at high speeds. The Vortex Mixer VX-200 is lightweight and has no suction feet, allowing it to be easily moved from one place to another.
The Vortex Mixer VX-200 can be operated in either touch or continuous mode. When in touch mode, the motion is activated by depressing the sample head and stopped by removing the pressure. If the unit is set in the on position, the Vortex Mixer VX-200 will operate continuously until turned off. The small footprint and portability of the Vortex Mixer VX-200 allow it to be used almost anywhere. The unit is safe for use in temperature controlled environments.
Click to enlarge image
The CombiCup head supplied with the Vortex Mixer VX-200 can be used with a single tube or a whole handful. The unique over molding technology used in the manufacutre of the CombiCup provides a sturdy plastic core surrounded with nonslip TPE. Optional heads accept microplates, microtubes, PCR strip tubes,15 and 50 ml tubes and blood tubes. All heads are friction fit - simply pull up to remove and press down to replace.
To get technical specification and ordering information click here:
